Some electrical jobs get planned weeks out. A homeowner in Washington schedules a panel upgrade before a kitchen remodel. A landlord lines up rewiring before a new tenant moves in. Those calls come in with time to prepare, and we scope the work on the phone before anything is booked.
Other calls come in the same morning something stops working. A breaker that will not reset, a dead outlet in a bathroom, a burning smell near a receptacle. We take those calls every day from 7:30 AM to 9:30 PM. Whatever brought you here, the process is the same: describe the situation, get a price on the phone, and get the visit on the schedule.
Call (484) 549-3289 for a quote.
A Level 2 home charger runs on a dedicated 240-volt circuit, and getting one installed starts with a look at the panel. In a town where a lot of the housing stock is older, that conversation matters. If the panel is already carrying close to its rated load, adding a charger circuit means talking through whether a service upgrade belongs on the same visit. We scope that on the call so nothing is a surprise when we arrive.
Recessed lighting installation and LED retrofits come up regularly in both homes and rental properties. The electrical side involves confirming the circuit can carry the added fixtures, checking that the boxes are rated for the load, and running any new wiring the layout requires. For landlords, updated lighting in a unit is one of the cleaner improvements to make between tenants, and we can scope it from a description without a separate site visit in most cases.
A two-prong ungrounded outlet is one of the more common things we find in older Washington homes. Replacing it with a properly grounded three-prong outlet, or installing a GFCI device where the circuit cannot be grounded, is work that brings the outlet up to current code and makes it safe for modern equipment. We also handle outlet additions in garages, finished basements, and outdoor locations, and switch replacements where a dimmer or a smart switch is going in.
Homes built in the 1960s and 1970s often have aluminum branch wiring, and it is worth knowing what that means before dismissing it. Aluminum expands and contracts differently than copper, and over time that movement loosens the connections at outlets and switches. A loose connection generates heat. The remediation ranges from replacing devices with aluminum-rated receptacles and switches to more involved work depending on what the inspection finds. We assess the scope on the first visit and explain the options before quoting anything.
We know schedules shift, so we keep booking flexible, and that applies whether the job is planned or urgent.
For work that cannot wait, describe the symptom when you call. A breaker that trips immediately on reset, a warm outlet, or a panel that is buzzing or smells like something is burning are all situations we take seriously. We ask the right questions on the phone to understand what is happening and what the visit needs to cover. The scope and the price are both settled before we book.
For tenants and properties that need to stay occupied, we plan the work around what the schedule allows. If a circuit needs to be isolated, we confirm which part of the property is affected and how long it will be down before the visit is booked. A business that has to stay open or a tenant working from home gets that conversation before the day of the visit, not after we arrive.
One call is enough to get the visit booked.
We test every circuit. We label every breaker. We leave it safe.
When a job is finished, we test the circuit or device under load before we leave. That means confirming the outlet is live, the breaker holds, the fan runs, or the charger circuit carries the voltage it is supposed to. Nothing is left for the customer to discover later.
Breakers that were added or replaced get labeled. If the panel was not labeled when we arrived, we label what we worked on and note what still needs attention. That record matters when a property changes hands or a tenant reports a problem months later.
For jobs that required a permit, the inspection documentation is part of the project record. Local permit rules decide which electrical jobs need an inspection, and we handle that process as part of the scope so the paperwork is in order when it is needed. If you are working out what the job needs, the services page covering electrical work goes through it.
Most electrical work only requires isolating the circuit being worked on, not shutting down the whole panel. Outlet replacements, lighting installations, ceiling fan work, and dedicated circuit additions typically mean one breaker is off while everything else in the house stays live. We confirm which circuits are affected when we scope the job, so there are no unexpected shutdowns.
Panel work is different. A service-entrance upgrade or a full panel replacement requires the main breaker to come off, which means the whole property is without power for the duration of that work. For a homeowner, that is a planned outage and we schedule it accordingly. For a business or a property with a tenant, we talk through the timing before anything is booked.
Backup generator hookup work involves the transfer switch, which also requires a brief main-panel shutdown during installation. We plan that around the property's schedule and confirm the window in advance.
The price for any electrical job depends on three things: what the fault or installation actually involves, what has to be opened up to reach it, and whether the existing circuit or panel can carry the change.
A straightforward outlet replacement in an accessible location is a quick scope. A rewiring job in a finished wall, or a charger circuit that turns out to need a panel upgrade first, involves more. We work through that on the phone before the visit, and if something changes once we are on site, we explain what changed and what it costs before we proceed. Nothing additional is done without your agreement.
The scope of the electrical work is priced before it starts.
Call (484) 549-3289 and describe what you are dealing with.
Washington is the primary coverage area, and we take calls from across Warren County. That includes Port Colden, Brass Castle, Washington Township, Anderson, and Oxford. Whether the job is a single outlet in a Washington rental or a panel upgrade in one of the surrounding communities, the process is the same: the scope gets discussed on the phone and the price is confirmed before anything is scheduled.
If you are not sure whether your address is covered, call and ask. We confirm coverage on the call.
Yes. Call and describe the work that was quoted and what it involves. We can discuss the scope with you, explain what the job typically requires, and give you a separate price. A second opinion on a larger job is a reasonable step before committing.
We can assess unpermitted work and explain what it would take to bring it up to the required standard. We do not sign off on work we did not perform, but we can do the corrective work and pull the appropriate permit for what we complete. The scope of that correction is worked out on the first visit.
Yes, wherever the work allows for it. We plan the sequence of a multi-day job so that the circuits most needed for overnight use are live before we leave. If a section of the work requires power to stay off, we explain that before the visit so you know what to expect.
Not necessarily. For panel work or jobs that require the power to be off for a period, we plan the timing to minimize disruption. Smaller jobs like outlet installation or lighting work can often be done while the business operates. We confirm what the job requires and discuss the options when we scope the work.
We scope the job on the phone from your description, which means you usually do not need to be present at the property to get a price range. For work that requires a permit or an inspection, we handle that process as part of the project and confirm what is needed before the visit is booked.
Call (484) 549-3289 and describe the property and the situation.
Homes in this part of New Jersey frequently have aluminum branch wiring, ungrounded two-prong outlets, and panels that were sized for a much lighter load than a modern household draws. Knob-and-tube wiring turns up in the oldest properties. These are all assessable on a first visit, and we explain what we find and what the options are before quoting any work.
An electrical problem that gets set aside tends to get worse, not better. A warm outlet that is left in use, a breaker that keeps getting reset, or a panel that has been flagged on an inspection report and not addressed are all situations where waiting adds risk without removing the problem.
Call Easton Electrical Company at (484) 549-3289.
We are available every day from 7:30 AM to 9:30 PM. Book the visit. Know the scope. Know the price before it starts.
There is more on our complete service area. Close by, we also take electrical work in: Washington Township, Chestnut Hill, Pohatcong Township, Holland Township, Mount Olive Township.
Below is a plain-language look at the electrical services we handle for homes and businesses in Washington, Warren County and across Warren County. Each row covers what the service includes, who it fits best, and one practical detail worth knowing before you call. If a job spans more than one category, we scope it together on the call so nothing gets missed.
| Electrical Service | What It Covers | Ideal For | Things to Know |
|---|---|---|---|
| Electrical Panel & Service UpgradesMost Popular | Panel replacement, Service-entrance upgrade, Subpanel installation, Load calculation | Homes adding major loads like an EV charger, or properties with a panel that fails inspection | A 60-amp or 100-amp service sized for a mid-century household often cannot carry modern loads. We confirm the right service size before any work is quoted. |
| Outlet & Switch Installation | GFCI outlet installation, AFCI breaker installation, Outlet and switch replacement, Commercial outlet buildouts | Homeowners, landlords, and businesses adding or updating receptacles | GFCI protection is required by code in kitchens, bathrooms, garages, and outdoor locations. Older homes in Washington, Warren County often lack it in one or more of those areas. |
| Dedicated Appliance Circuits | Dryer and range circuits, Refrigerator and freezer circuits, Home office circuits, Workshop circuits | Homeowners adding a major appliance or a home office that needs its own circuit | A dedicated circuit keeps a high-draw appliance from sharing load with other devices, which reduces nuisance trips and protects the appliance. |
Call (484) 549-3289 and we will walk through the scope with you, confirm the price, and get the visit on the schedule.
(484) 549-3289